Category Archives: Uncategorized

Plumbing Leaks Attract Household Pests

Published by:

Nobody likes a plumbing leak it wastes water, drives up your month-to-month bill, makes a mess and is an all around stress. But there’s still another awful consequence that might not instantly come to mind: household pests.

Like humans, uninvited house guests like pests and rodents require water to survive. Just a little water could do the trick for example, you might have spotted the occasional pest treating himself to water drops left behind in the bathtub.

But when you’ve got a plumbing drip, there’s a steady availability of water, and it’s often hidden from view. This can create the perfect oasis for home insects to create up camp without your knowledge.

Ha! What now?

Sudden pest sightings don’t always mean you have a plumbing problem, but it’s cause for a small research. Just take note of in which you frequently see rodents or insects and examine any nearby places with access to operating water. While there’s always the regrettable opportunity that there’s a hard-to-reach break in a pipe inside your walls, a lot of leakages occur in locations where are reasonably available.

Examine underneath your fridge for pooling water, as this will be a favorite hangout for cockroaches. If you have an automatic ice maker, make sure to additionally inspect the water range resulting in your freezer. These lines are often made of plastic material, and even a tiny pinhole leak can produce adequate water for a whole colony of intruders. While you’re at it, inspect the water lines leading to your washing device, dishwasher and some other plumbing-connected appliances.

Various other effortless leak-prone spots to inspect are right below your restroom and kitchen basins. Start the cupboards and look for moisture under your trash fingertips or sink traps the U-shaped bend in the pipe coming from your sink drains.

If and whenever you locate the supply of a leak, you should repair it immediately or call a plumbing professional for assistance. Even if you deploy traps or poison to deal with the present infestation, the water supply will simply draw in much more pests.

Seal It Up

There’s another plumbing-related vulnerability that could be permitting bugs into the residence the seals surrounding plumbing pipelines coming using your wall space.

As you inspect your fixtures, pipelines and appliances for indications of a leak, make sure to examine the spots exactly where pipelines enter the wall. Essentially, they should all be sealed with metal dishes, rubberized gaskets, foam insulation or some other physical barrier. If you find spaces, that’s only one even more way invasive pests can get into your house.

If you live in San Diego, Resurrection Plumbing is the best company to help with all your plumbing needs.

Installing an Electric Water Heater

Published by:

Practice our four steps to connect your electric water heater

With right maintenance, today’s electric water heaters are designed to last approximately 6 to 12 years. But if you need to upgrade, follow our steps, which include placing the brand new water heater, connecting the electrical supply, and adjusting the thermostat.


  • Ensure that you turn off the power and do not restore it till the installation is finished.
  • Make sure the heater is filled with water before restoring power, or else the heating element could be destroyed.

The Home Depot offers services for same-day set up when you call prior to noon in most locations. Plan a visit today.


Set water heater in place and solder the switch off valve

  • Make use of a level alongside the water heater and level it with shims if necessary.
  • Ensure that the valve is in the open position and connect it to the supply line by using propane torch and lead free solder.

Wrap threads and also install fittings

  • Attach the blue-coded fitting to all the cold-water inlet and the red-coded fitting towards the hot-water outlet.
  • These fixtures are directional as they’ve arrows that reveal correct installation. Be sure to adhere to correct course and tighten with a variable wrench.

Connect the water supply

  • Connect the plumbing system offer lines towards the water heater in accordance to manufacturer’s guidelines and neighborhood signal requirements (solid copper pipe or flexible copper offer lines are common).
  • Be sure that the drain valve is entirely closed, and next turn the main water supply on and open all line valves.
  • Open one or more taps on the home’s best floor and run the water till it flows steadily from the faucets. A constant flow of water from the hot water faucet indicates a full water heater.
  • Whenever entirely close, filled the faucets and check for leaks.

Connect to electrical adjust and supply thermostat

  • Make certain that energy towards the water heater is turned off during the primary circuit breaker. If you have fuses, remove all of them. Link the electrical source according to manufacturer’s instructions.
  • Connect blank floor or copper wire to the floor screw. Replace the electrical accessibility dish.
  • Remove the thermostat access plate and then draw straight back any insulation to expose the thermostat.
  • Make use of a screwdriver to change the control temperature establishing in 10-degree increments. The advised temperature is 120 levels.
  • Swap the thermostat access dish. When the tank is full, restore power and press the reset key on the panel.